REF6032CF Pro
SKU:
$0.00
per item
• Plus One® woofer cones - This patent pending technology deliver a cone with more surface area than competing models of the same size. The result is increased bass output and higher efficiency.
• True Four Ohms— All Reference speakers feature two ohm voice coils. Original factory-installed speaker wiring in many cars is 18-22 gauge. This wire, and heating in the voice coil when power is applied, increase the impedance “seen” by the amplifier or head unit. The impedance of Reference Speakers has been adjusted to compensate for this increase and can be safely driven by any head unit.
• Edge-driven textile dome tweeters - These are not commonly used w-domes, but fully-edge-driven domes like those found in better home audio speakers. The benefit is increased power handling and reduced distortion at high output levels. This technology also allows for better integration with the mid/woofer.
• Unipivot™ (patent no. 6,002,780) allows the tweeter to be pointed at the listeners location even when the speaker is mounted off axis. This optimizes the stereo image and ensures a more uniform response.
• Tweeter level adjustment - The 6032cf also features a tweeter level adjustment located on the front of the speaker and can be set at the reference level of 0dB. If the speakers are located low in the doors or if you are looking for a brighter sound, set the tweeter at +3dB
.• Grilles sold separately (6032gr)
Power Handling, RMS: 60 watts
Power Handling, Peak: 180 watts
Sensitivity (2.83V @ 1m): 93dB
Frequency Response: 53Hz - 21kHz
Impedance: 2 ohms
Mounting Depth: 2-1/16" (52mm)
• True Four Ohms— All Reference speakers feature two ohm voice coils. Original factory-installed speaker wiring in many cars is 18-22 gauge. This wire, and heating in the voice coil when power is applied, increase the impedance “seen” by the amplifier or head unit. The impedance of Reference Speakers has been adjusted to compensate for this increase and can be safely driven by any head unit.
• Edge-driven textile dome tweeters - These are not commonly used w-domes, but fully-edge-driven domes like those found in better home audio speakers. The benefit is increased power handling and reduced distortion at high output levels. This technology also allows for better integration with the mid/woofer.
• Unipivot™ (patent no. 6,002,780) allows the tweeter to be pointed at the listeners location even when the speaker is mounted off axis. This optimizes the stereo image and ensures a more uniform response.
• Tweeter level adjustment - The 6032cf also features a tweeter level adjustment located on the front of the speaker and can be set at the reference level of 0dB. If the speakers are located low in the doors or if you are looking for a brighter sound, set the tweeter at +3dB
.• Grilles sold separately (6032gr)
Power Handling, RMS: 60 watts
Power Handling, Peak: 180 watts
Sensitivity (2.83V @ 1m): 93dB
Frequency Response: 53Hz - 21kHz
Impedance: 2 ohms
Mounting Depth: 2-1/16" (52mm)
